Product Description
Plastic film spans multiple greenhouses, saving costs and being easy to use. It adopts a combination of hot-dip galvanized light steel structure and high-strength anti-aging agricultural film, with an arched streamlined design. The overall structure is relatively simple and has strong resistance to snow and wind. For different situations, single-layer film, double-layer film or pure insect proof net composite structure can be used. Our film adopts new domestic technology, and the service life can be extended by 2-4 years compared to normal. This product is widely used in various planting scenarios, such as vegetable planting, fruit planting, and seedling hydroponics. The heating or cooling system can be replaced and adapted in different environments. We support one-stop service from design, installation, delivery to after-sales service.
Product Advantages
Strong and resilient structure: The main skeleton is made of Q235B and above grade steel, which has been hot-dip galvanized. The thickness of the galvanized layer is much thicker than that of ordinary steel, and it can bear a large weight, ensuring a service life of more than 15 years.
Multiple Coverage: The film can be selected from double-layer or single-layer films, with a light transmittance of over 90% and a 30% increase in insulation for double-layer films. It is suitable for mass production in various climates.
Intelligent environmental control: It can be equipped with various built-in systems such as electric film rolling system, wet curtain fan cooling system, external shading net, internal insulation system, and IoT intelligent control cabinet, and supports remote control on mobile phones or PCs.
Factory direct supply: 90% self-produced rate, CE certification, 15 patents, strict three-stage inspection system, zero defects at the factory
Customized services: We provide customized services for climate data collection, structural strength verification, foundation design, environmental control selection, irrigation schemes, and supplementary lighting systems at the project site. We also provide installation drawings and engineer installation guidance.
Technical Specifications
| parameter | Standard Configuration | Optional upgrade |
| Span | 8.0m | 6.0m / 9.6m / 12.0m |
| Bay | 4.0m | 3.0m / 5.0m |
| Eave Height | 4.5m | 3.0m ~ 6.5m(adjustable) |
| Top Cover | Double layer inflatable PO film (thickness 0.15mm × 2) Light transmittance ≥ 90%, drip proof and anti-aging |
Three layer inflatable film/diffuse emission film/fluorescent conversion film |
| Side Cover | Same top double-layer film | Single layer high permeability film+detachable insulation layer/insect screen composite film |
| Frame Galvanizing Layer | Hot dip galvanizing ≥ 275g/㎡ (equivalent to ISO 1461) | 400g/㎡(Corrosion resistance enhancement, suitable for coastal/high humidity areas that are prone to rusting) |
| Snow Load Resistance | 0.65 kN/㎡ | 0.85 kN/㎡ / 1.0 kN/㎡(Reinforced truss+steep roof) |
| Wind Load Resistance | 0.55 kN/㎡ | 0.75 kN/㎡ / 1.0 kN/㎡(Typhoon resistant type, reinforced with pressure film tape) |
| Insulation System | Double layer inflatable membrane (air insulation layer) | Internal insulation curtain (aluminum foil reflective type) Internal insulation curtain (aluminum foil reflective type) Double screen (insulation+shading) Adding polystyrene board insulation layer to the wall |
| Heating System | Reserved heat source interface (gas/hot air stove pipeline) | Double screen (water insulation and heat dissipation fins/hot air stove/ground source heat pump/biomass boiler temperature+sunshade)Double screen (water insulation and heat dissipation fins/hot air stove/ground source heat pump/biomass boiler temperature+sunshade) |
| Ventilation Method | Electric roll film top window (double-sided roll up, window opening angle 0~80 °) | Wall additional polystyrene board insulation, side wall electric roll film+wet curtain - fan forced ventilation Fully automatic sunroof system layer |
| Environmental Control System | Intelligent Environmental Control Cabinet (PLC) Temperature and humidity+roll film+fan linkage control |
Internet of Things+Remote Management via Mobile APP Scalable automatic control of light, CO ₂, water and fertilizer integration |
| Other Systems | Different systems can be matched according to your needs | Can be paired with Co2 system, hanging system, irrigation system, integrated water and fertilizer system, cooling system, hydroponic system, lighting system, solar energy system, fish vegetable symbiosis system, etc |
|
The above parameters are basic parameters. If you have special customization or other requirements, please contact us directly. We will provide you with a customized solution based on the information you provide |
||
Application and Solutions
In winter, when the temperature drops below -30 ℃, vegetables freeze to death. The double-layer inflatable film, insulation system, and heating interface are used, with a double-layer film structure and an air insulation layer formed in the middle. The insulation rate can be increased by more than 30%
Risk of Snow Collapse
Reinforced truss+steep roof design, enlarged main skeleton section, nodes connected by high-strength bolts, roof designed as a steep arch or apex, snow load design value can reach 0.8-1.0kN/㎡.
Custom Commercial
Greenhouse Services
As the source production factory, we provide flexible fully customized services:
SAINPOLY Full-Service Support
FAQ