Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 1

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 2

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 3

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 4

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 5

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 6

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic 7

Sainpoly PC Greenhouse 9.6-12m Metal Frame Hydroponic

Sainpoly PC Greenhouse 9.6–12m Metal Frame Hydroponic is a long, sturdy greenhouse combining a metal frame with UV-resistant polycarbonate (PC) panels to give diffused light, insulation, and 9.6–12 m of growing area.

Selling points: durable, weather-resistant construction; high light transmission with good thermal insulation from twin‑wall PC panels; hydroponic‑ready design that makes adding irrigation, shelving, and vertical systems easy.

User perks include relatively simple assembly, adjustable ventilation and a spacious layout suited to hobby growers or small commercial setups for year‑round protected cultivation.

Inquiry

Write a Review

Ventilation system

Manual and Electric

Bay Width

Span Width

9.6m 10.8m 12m

Packing

Safe Packing

Covering

PC Sheet Cover Greenhouse

Frame material

Glavanized Steel Materials

Height

4.5-8m

Cooling system

Cooling Fan System

Instruction for use

With installation manual and installation video.

Sturdy Polycarbonate Modular Hydroponic

The Multi span Polycarbonate greenhouse features a robust metal frame and hydroponic-ready layout, offering spacious single spans (9.6–12 m) and 4.5–8 m heights to boost crop density and scalable production. Built with impact-resistant polycarbonate panels, safe packing and a streamlined arched profile, it withstands winds up to 120 km/h, snow loads of 30–55 kg/m² and heavy rain (140 mm/h) while supporting crop loads of 15–30 kg/m². Factory-direct pricing, free samples (freight not included) and dedicated after-sales engineers who provide planning drawings, installation manuals and remote support make assembly and long-term hydroponic management simple and cost-effective.

Sturdy PC Hydroponic Shelter

The Multi span Polycarbonate greenhouse features a sturdy metal frame available in single span widths of 9.6m, 10.8m and 12m, a single bay width of 4m and heights from 4.5 to 8m, offering high wind resistance (up to 120 km/h), snow load capacity (30–55 kg/㎡) and heavy rain tolerance (140 mm/h). As a hydroponic-ready solution, it supports crop loading of 15–30 kg/㎡ and delivers practical value by extending growing seasons, improving yield stability and arriving with secure packing from a factory manufacturer. The product’s polycarbonate panels, multi-span modular layout and robust connections create a scalable, easy-to-assemble structure backed by professional after-sales service, planning drawings and installation manuals to tailor systems to local temperature and wind conditions.

Polycarbonate Metal Hydroponic Greenhouse

The Multi span Polycarbonate greenhouse Sainpoly PC Greenhouse features a sturdy metal frame for hydroponic cultivation with single span widths of 9.6 m, 10.8 m and 12 m, a single bay width of 4 m, and adjustable heights from 4.5 to 8 m. Built to withstand harsh weather, it offers wind resistance up to 120 km/㎡, snow resistance of 30–55 kg/㎡, maximum rain capacity 140 mm/h and crop loading of 15–30 kg/㎡, and ships in secure packing. Manufactured in-house, the factory provides free samples (freight excluded) and professional after-sales engineers who supply planning drawings, installation manuals and on-demand support for assembly and system selection.

◎ product nicety 1

◎ product nicety 2

◎ product nicety 3

Robust Efficient Hydroponic Greenhouse

Sainpoly’s PC Greenhouse 9.6-12m Metal Frame Hydroponic draws on the brand’s years of greenhouse engineering to deliver a sturdy, purpose-built Multi span Polycarbonate greenhouse that balances commercial performance with user-friendly assembly. It combines a corrosion-resistant metal frame, UV-stable twin-wall polycarbonate panels, modular multi-span layout, and precise ventilation and irrigation compatibility to support efficient hydroponic production, uniform light diffusion, and year-round climate control. Easy assembly, customizable span and accessory options, reinforced ridges, low-maintenance materials, and improved thermal insulation translate into higher yields, lower operating costs, and long-term durability.

Material introduction

The Multi span Polycarbonate greenhouse uses multi-wall polycarbonate panels that offer high light transmission, UV protection and impact resistance while providing good thermal insulation for year-round growing. A heavy-duty metal frame with anti-corrosion treatment and reinforced connections delivers the structural strength to meet wind resistance up to 120 km/h and snow loads of 30–55 kg/m². Together these materials create a stable, corrosion-resistant shelter ideal for hydroponic cropping, supporting crop loads of 15–30 kg/m² and heavy rainfall up to 140 mm/h.

◎ material introduction 1

◎ material introduction 2

◎ material introduction 3

FAQ

What kinds of hydroponic systems can I run inside the Sainpoly PC Greenhouse 9.6–12m metal frame greenhouse?

The greenhouse is suitable for most common hydroponic systems, including NFT (nutrient film technique), DWC/deep water culture, ebb-and-flow, drip systems and small aeroponic rigs. Its rigid metal frame and clear polycarbonate covering support hanging rails, bench systems, and suspended reservoirs — useful for vertical or multi-tier setups. Always check the manufacturer’s load ratings and plan support points where pumps, gutters or heavy reservoirs will hang.

Can I use this greenhouse year-round and in different climates?

Yes — the polycarbonate panels provide better insulation and light diffusion than single-layer plastic, making year-round use possible in many climates. In cold regions you’ll likely need supplemental heating and good sealing; in hot climates add ventilation (ridge vents, side vents, exhaust fans), shading and evaporative cooling as needed. Condensation control, thermal screens and thermostatic controls will extend functionality across seasons.

What crops and production scenarios work best in this size greenhouse?

Ideal crops include leafy greens, herbs, microgreens, strawberries, tomatoes, cucumbers and other high-value vegetables commonly grown hydroponically. It’s well suited for small commercial production, research and educational projects, nurseries for seedlings, or demonstration/urban farming setups. Layouts can be adjusted for bench culture, vertical racks, or mixed-use propagation plus production.

What should I consider when planning irrigation, drainage and utilities for a hydroponic setup here?

Plan a centralized nutrient reservoir with properly sized pumps, filters and return lines, and design plumbing routes to minimize bends and head loss. Provide a slight slope or dedicated drain channels for easy cleaning and overflow control; include access points for flushing and winter draining. Install electrical circuits with GFCI protection and plan space for controllers, sensors, water treatment and a convenient maintenance area.

How difficult is assembly and what maintenance does this greenhouse need?

Assembly generally requires basic hand tools, 2–4 people for lifting panels and aligning the frame, and careful anchoring to a solid base (concrete, ground anchors or screw piles depending on site). Regular maintenance includes cleaning polycarbonate panels with mild soap (avoid abrasive cleaners), inspecting and tightening fasteners, checking seals and gaskets, and treating or repairing any frame corrosion. Periodic inspection of vents, door hardware and irrigation fittings will prevent downtime.

Can I modify or expand the greenhouse layout later on?

Yes — metal-frame polycarbonate greenhouses are often modular, letting you add end walls, ventilation, shade cloth, benches, shelving, vertical systems or additional bays as needs grow. You can partition the interior for staging/propagation areas, attach gutters for rainwater harvesting, or integrate automation systems for climate and nutrient control. Before major modifications, confirm load capacities and compatibility with the original frame and panel system.

Let’s Build Your Commercial Greenhouse Together

Share your project details – we’ll provide a tailored solution and a clear roadmap to success.